Opto-Mechanics
The product range comprises a combination of newly developed and well-established products to enable mounting of any optical component, including mirrors, prisms, lenses, polarisers, fibre optics and filters, and manual micropositioners.
Ealing offers three different ranges of Manual Micropositioners – MicroMech™, MiniMech™ and MacroMech™.
Linear Stages provide a wide choice of travel from 6.5 mm with micrometer-driven MicroMech Stages to 50 mm with micrometer-driven MacroMech stages.
Rotary Stages offer a full 360-degree coarse travel range and a minimum of 5 degrees fine calibrated adjustment. Tilting Stages provide either single or two-axis tilt up to a range of 10 degrees, depending on unit size.
Tilt and Rotation Stages combine two axes of tilt with an axis of rotation over a 5-degree range.
All Ealing mounting hardware is designed to fit on to its range of Optical tables, Breadboards and Rails.
Please see below individual products and summary pages that can be viewed as extracts from the Ealing Catalogue.Products
Optical Tables, Breadboards and Rails
Rails and Accessories
Ealing TriRails are available in lightweight, low cost Aluminum extruded from a hard aluminum alloy. They are based on the widely used triangular bench profile originally offered by Ealing Electro-Optics.
MORE INFORMATIONMounting Hardware
Mounting Bases & Clamps
Ealing's range of Post Holder Mounting Bases is designed to be used with any of our Post Holders.
MORE INFORMATIONMounting Posts and Holders
Ealing's new range of stainless steel half-inch Mounting Posts offer excellent compatibility with all industry standard component mounts with M4 (8-32) threads or clearance holes.
MORE INFORMATIONMirror Mounts & Component Mounts
Component Mounts
How they fit together
MORE INFORMATIONFilter Wheels and Filter Holders
The modular filter wheels accept up to two interchangeable wheels with either 6 or 12 filter positions for 25.4mm (one inch) and 12.7mm (half-inch) diameter filters respectively.
MORE INFORMATIONLens and Polariser Mounts
Thin lenses or beamsplitters of 12.7mm (half-inch), 25.4mm (one inch), and 50.8mm (two-inch) diameter can be held in these versatile component mounts.
MORE INFORMATIONBeam Steering Devices
This new beam steering assembly is based on low cost standard components from the range of hardware and mirror mounts. This makes it extremely affordable and very flexible in its application.
MORE INFORMATIONMounted Iris Diaphragm
This range of Mounted Iris Diaphragms are lever operated and offer a continuous variable diameter aperture in a range of four sizes.
MORE INFORMATIONPrism Tables and Platforms
The new Ealing Kinematic prism and cube beamsplitters mounts provide angular adjustments to allow precise alignment of prisms and beamsplitters in optical systems.
MORE INFORMATIONRectangular Apertures
Rectangular Apertures can be used to define the boundaries of an optical path or to mask out specific areas in an optical system, for example on a test target, monochromator, CCD or a detector.
MORE INFORMATIONMirror Mounts
How they fit together.
MORE INFORMATIONKinematic Mirror Mounts
Kinematic Mirror Mounts are designed to accept round, front surface mirrors or beamsplitters of either 76.2mm (3 inch) or 101.6mm (4 inch) diameter.
MORE INFORMATIONPrecision Mirror Mounts
Ealing Precise Mirror Mounts are designed to accept round, front surface mirrors or beamsplitters of up to 50.8mm (2 inch) maximum diameter.
MORE INFORMATIONPrecision Thin Optics Mounts
Precise Thin Optic Mounts are very similar to the standard Precise mirror mounts except these are designed specifically to accept thin, round, front surface mirrors or beamsplitters.
MORE INFORMATIONTop Adjust Mirror Mounts
A unique high resolution adjustment system with vertically-mounted controls makes these kinetic mirror mounts particularly valuable for use where access is restricted or where it is necessary to keep the operator's hands away from the optical path.
MORE INFORMATIONManual Micropositioners
MacroMech Stages
MacroMech stages are designed for positioning medium weight loads (12 kg horizontal load) with a high degree of accuracy and stability.
MORE INFORMATIONMicroMech Linear Stages
These Stages are light weight, accurate and compact making them ideal for use where space is restricted. They are supplied fitted with either a high resolution thumbscrew or a 6.5mm travel precision metric micrometer with a calibrated scale.
MORE INFORMATIONMiniMech Linear Stages
MiniMech Linear Stages are supplied with either thumbscrew or graduated micrometer actuators.
MORE INFORMATIONMiniMech Rotary Stage
The MiniMech Rotary Stage provides a full 360 degres of rotation from a stage supported on radial ball bearings with a resolution of better than 30 arc seconds.
MORE INFORMATION